Jump To Installation

PHOTOBARS 7.0 IMPORTANT NOTE:  Installation of PhotoBars 7.0 requires that the user first have installed the current PhotoTools 3.0.6 update, which can be confirmed by checking the file properties of the PhotoTools 3.0.6 installer and verifying that the file version is "4.x"; the older release was "2.x".

Before downloading and installing PhotoBars 7.0, PLEASE ensure you have PhotoTools 3.0.6 installed and working properly.   If PhotoTools does not work, please verify the installed files against those listed here.  Some users have experienced problems on Windows 98 and Windows 98SE, but they were resolved by downloading the current update of PhotoTools 3.0.6.  Once you are confident PhotoTools is working, then PhotoBars 7.0 should work as well.  If all efforts fail, please contact me and I will do what I can to help. 

EDITING TOOLBAR BUTTONS

I've received a few questions about how to edit the toolbar buttons.  The following is a brief description:

With the toolbar floating and the Customize Toolbars menu open, open the Icon Button Editor by a CTRL-ALT-DOUBLECLICK on the button icon of interest. Revise the menu command type appropriate to the command's new position in the Photoshop menu structure. Menus number left to right, starting with the FILE menu as menu 0. Menu items number top to bottom, with the topmost item/submenu being numbered 0. Separator bars are also counted as an item. When creating a menu button, the item number is -1 and when creating a single item button, the submenu is -1.

• EXAMPLE:   CUT command = Menu 1, Submenu -1, Item 6

• EXAMPLE:   ROTATE CANVAS submenu = Menu 2, Submenu 10, Item -1

Currently displayed toolbars can be directly edited without going through the Customize Toolbars dialog, by CTRL-ALT-DOUBLECLICKING directly on the toolbar button.  Note that the toolbar must be floating for this to work.  Docked toolbars cannot be edited.  Also, to shift buttons around on toolbars, just hold down ALT while selecting and dragging the button icon to the desired location.  Dragging it off the toolbar will delete the button.  Dragging an icon just a few pixels away from another will create a space between them.

Note that if you edit a button from one of the Customize Toolbars categories and that button has already been used on a toolbar, the new edits are not mapped to the toolbar.  Instead, it will be necessary to drag the revised button onto the toolbar and to delete the previously used button.  Alternatively, you can directly edit the button on the toolbar in the same manner as that edited in the Customize Toolbars category.  Just Ctrl-Alt-Doubleclick on the toolbar button itself to open the Icon Button Editor.

To make a new icon graphic, create an image that is 19 pixels wide by 17 pixels high, not exceeding 16 colors in depth.  Copy that image to place it on the clipboard and then enter the Icon Button Editor.  Click on the button icon in the Icon Button Editor to paste the clipboard image as the new icon.  When using Photoshop to edit a new icon graphic, I commonly saw the graphic get corrupted in the paste, as if it were shifted to the right by about 5 pixels and with that 5 pixel area filled in white.  However, by saving the graphic as a 4-bit BMP file, opening the file in Paint, selecting and copying the graphic, and then performing a paste into the Icon Button Editor, I was successful in creating new icons.

For the existing toolbars I've created, these may certainly be further customized by the user as desired, by adding and/or deleting buttons.  However, a button on one toolbar cannot be dragged onto another.  So, the toolbars cannot be used to build additional toolbars; this requires using drag and drop of icons from the Customize Toolbars categories.  I hope that makes sense.

PHOTOBARS 7.0 INSTALLATION

QUESTIONS?? First, please read the list of Limitations

CAUTION: While Photoshop supports use of a secondary plug-in path for third-party filters, both PhotoTools and the PhotoBars supplement should be installed directly to the primary plug-ins location so that all support files are placed as required throughout the Photoshop 7.0 directory structure.

1. Download PS7BARS.EXE.  This is a password-protected, self-extracting zip file.

2. Run the self-extractor to unzip the files into the PS7BARS folder or specify an alternate folder.  The following will be extracted:

   Extensis Folder - contains the PhotoBars folder and the PhotoBar.8bf and PhotoBars.exli.dll files.

   README.rtf - Installation procedure with important notes and change history.  Similar in content to this page.

   Install.txt - Brief summary of how to install my customized files.
   
   

3. Install the current release of Extensis PhotoTools 3.0.6 available as a free update from Extensis.  The current installer is file version 4.x. 
   

4. IMPORTANT!!  If there is no previous installation of PhotoBars 7.0 or if PhotoTools 3.0.6 has just been reinstalled (the installer removes the PhotoBars components), skip to the next step.  Otherwise, rename the Photoshop 7.0/Plug-ins/Extensis/PhotoBars folder to a name such as Old_PhotoBars.  This step is taken for two reasons: (1) to backup and avoid accidentally overwriting any of the user's custom toolbars, and (2) to ensure a "clean" installation of PhotoBars 7.0 so that the PhotoBars and Photobars/category folders do not contain extraneous files that don't apply to Photoshop 7.0.
   

5. Open the PS7BARS folder.  Copy the Extensis folder, as is, into the Photoshop 7.0/Plug-ins installation folder.  Select "Yes to All" at the prompt to replace existing files.  Doing this will merge the Extensis folder with PhotoBars components into the existing Plug-ins/Extensis folder, but only PhotoBars components will be added or overwritten.
   
   NOTE: If you are installing PhotoBars into a non-English edition of Photoshop to see if PhotoBars will work for you, please note that the Plug-ins folder may be named differently.  For example, in the Italian edition of Photoshop the folder is called Plug-in.  The Extensis folder should be copied into the equivalent of the English Photoshop edition's Plug-ins folder.

Saving a backup copy of the PhotoBars CS by burning a copy of the files to a CD-R is discouraged. The preferred approach is to burn the original self-extracting zip file and password to a CD or, recompress the extracted files as a new zip file without a password, and burn that to a CD. The same approach is also recommended for making a backup of the user’s own customizations. Use of a zip file in this manner preserves the file attributes so that when the files are extracted to a hard drive, they are ready for error-free use. Otherwise, if the extracted files are burned to a CD and later restored to a hard drive, the user must ensure the read-only attribute is cleared for all files so as to prevent errors in the use of PhotoBars.

• Use of the Icon Button Editor to create toolbar buttons for keystroke commands does not work.  This problem exists back to PhotoTools 3.03 for Photoshop 5.5.  I do not have a solution for this problem.
   
• The Custom Buttons category can only store up to 44 new buttons.  I can't imagine this being a problem for anyone however, as the need for so many custom buttons is unlikely.
   
• Installation of PhotoGraphics 1.0 after PhotoTools 3.0.6 will remove the Extensis top-level menu in Photoshop due to an older file replacing a newer version. The solution is to reinstall PhotoTools 3.0.6. Since the PhotoTools 3.0.6 update also removes the PhotoBars files, it will also be necessary to reinstall the PhotoBars 7.0 supplement afterwards.
   
• Under Windows XP, attempts to access the PhotoBevel dialog will sometimes result in the activation of a random toolbar.  The toolbar can be closed without problems and a subsequent attempt to access the PhotoBevel dialog will proceed.  This problem is similar to one observed with Photoshop 6.0/PhotoBars 6 on a Windows 2000 platform and is regarded as a minor nuisance only.